Temperature Controls

HeaterTek temperature control systems are designed to provide accurate, dependable performance for a wide range of industrial heating applications. Engineered for process stability and ease of operation, these systems help maintain consistent temperatures across demanding environments and aqueous chemistries.

For accurate control of most aqueous chemistries
10-foot FEP fluoropolymer covered J-type thermocouple sensor included (consult factory for other options)
85-480 VAC input

THERMOSTATS

1/4 DIN Single Set Point Controller, cUL
1/8 DIN Single Set Point Controller, cUL
Non DIN (1.3”X3” approximate cutout)
Single Set Point Controller, cURus
1/16 DIN Dual Display and Dual Setpoint
Controller, cUL

COMBO CONTROLS

(SIZED PER HEATER LOAD)

cULus (upon request)
20 A, 40 A, 80 A, and 120 A switching capacity
Plastic control box for corrosion resistance
High temperature audible alarm with locking
relay and push reset included
(requires Thermal Protector wiring to heater)
Additional cost: conductivity probe level control
(NOTE: conductivity probe device must be purchased separately)
Consult factory for additional options

Note

ALL immersion heater installations MUST have both liquid level control for low level heater shut off AND over-temperature thermal protection.

Contact

If you have any questions about our products or need expert assistance with your purchase, our team is here to help. Feel free to contact our experienced and knowledgeable team by phone, email, or through the online contact form above.