42008 3 FL - 0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.1870" (3/16) LOC x 1.5000" (1-1/2) Reach - Uncoated Hand Tap-Chamfer-Taper 7/16~1/2 x 3/4 x 2-1/32

7/16~1/2 x 3/4 x 2-1/32 FLANGED STRAIGHT SHANK / FLUTE STANDARD SPADE DRILL HOLDER

250" x 6" Square Shank Tool Holder to hold a Negative TNMG 543 at 30DEG Lead Neutral No Coolant

IR16-14UNPC3030T

04186HF YG 1-1/8" Diameter x 1" Shank x 2" LOF x 4-1/2 OAL 6 FLUTE REGULAR LENGTH TIALN-FUTURA COATED HSS End Mill

125" Tip Diameter x 1" Length of Cut x 7Deg Angle Per Side x 0

42008 3 FL - 0.1250" (1/8) Cutter DIA x 0.0100" Radius x 0.1870" (3/16) LOC x 1.5000" (1-1/2) Reach - Uncoated Hand Tap-Chamfer-Taper 7/16~1/2 x 3/4 x 2-1/32Harvey Tool 0. 1250" (1 8) Cutter DIA x 0. 0100" Radius x 0. 1870" (3 16) Length of Cut x 1. 5000" (1 1 2) Reach Carbide Corner Radius End Mill, 3 Flutes