Sway Bar Arm 1.50 x 48 Spl 30 Deg 1965-chevrolet-malibu-esi1458781 Shock Mount - Rear -

Shock Mount - Rear - Lower - Weld-On - Adjustable - 1/4 in Thick - Steel - Natural - 3 in Axle Tube - Each

25 in Diameter Coils - Vertical - Universal - Each

7 Gen III Hemi

15 X 11-1/4 (INCLUDING MOUNTING FLANGES)Normal constant operating pressure 80 psi

30 in Tall - Open End - Steel - Chrome - Universal - Each

Sway Bar Arm 1.50 x 48 Spl 30 Deg 1965-chevrolet-malibu-esi1458781 Shock Mount - Rear -Sway Bar Arm 30 Degree 1 1 2 in 48 Spline 3 4 in Thick Steel Natural Each Due to the precision tolerances: Before installing, apply a small amount of grease, then rotate the stud back and forth ensuring it is free. If over greased, remove the grease fitting to release pressure