Jack Puck 4x100 NOTE: these are a direct

NOTE: these are a direct fit for the MK1

- drop bracket x4

5") for the rear bar and 810mm (32

Insert thread insert through the plastic mount and use M6 bolts through the bracket into the threaded insert

The basics are:

Jack Puck 4x100 NOTE: these are a directProtect your pinch welds with our high quality Jack Pucks. They are made of AL 6061 and have been hard anodized black. They come with a Nylon insert on which the pinch weld sits. The Nylon insert has 3 magnets that hold the Jack Puck onto the pinch weld until you lift it with a Jack. It is made to sit in a 2. 5 3" cup to ensure no car ever slips off the jack ever again. When done, simply pull the red tag to remove the Jack Puck and you are set.